|
have a tendency to
cluster together. At the point of combustion, the outer fuel molecules protect the inner molecules from being exposed to
oxygen, causing some of the inner molecules to go unburned. This process both reduces fuel efficiency and
increases the amount of unburned fuel being blown out of the engine’s exhaust as polluting emissions.
The Etorus FE’s patented technology alters this process. Prior to combustion,
fuel passes through the Etorus FE, which is installed on the fuel line. When fuel passes through the device,
reactions occur between the fuel and the Etorus FE’s patented combination of metals and rare earth elements.
These reactions separate the clustered fuel molecules so that a greater surface area is exposed to oxygen at
the point of combustion.
A fitting comparison would be placing a piece of charcoal into a furnace for 30 seconds.
As the charcoal burns, oxygen surrounds the outside of the charcoal and cannot penetrate the inside, allowing
only the outer region to burn. Alternatively, if the same piece of charcoal were crushed into a powder and
spread out into the furnace for 30 seconds, more of the surface of the charcoal would be exposed to oxygen and a
larger percentage of the charcoal would be burned. In very basic terms, this is what happens as fuel passes
through the Etorus FE. Clustered fuel molecules are separated so that more oxygen can cover a greater surface area of the fuel molecules at the point of combustion.
As more fuel is burned, more energy is created and less unburned fuel is blown out of the
exhaust as emissions. A more efficient burn results in improved fuel consumption and less fuel required to
generate horsepower. A cleaner burn results in decreased emissions, improved oil chemistry, and cleaner
engine parts, resulting in reduced maintenance requirements.
The Etorus FE is available for purchase or rental, or through the Etorus Pay Per Save™ (PPS) Program, which
allows our customers to immediately install the technology and realize fuel savings without any capital
expenditure or risk, by simply sharing a portion of their fuel savings after they have occurred.
Installation of the device, which is non-intrusive and thus does not affect engine warranties, is an extremely
simple process for which we provide extensive customer support, with installation times typically ranging from 30
to 60 minutes.
For a more detailed explanation,
please see the Etorus FE Technology Write-Up.
|
|
